Anyone Must Consider Before Applying Custom Bumper
When you have made your custom bumper stickers, the next step is employing it to your car, but before you do, here are few tips you must consider.
Contoured surfaces, you should be aware that bumpers are not flat, there are quite a lot of concave or convex curves on it, so tendency of lifting often occurs when you applying your custom bumper stickers, to avoid this problem try to use film which has less thickness, some of the manufacturers give 2 mil his or her recommendations, but you must be more carefull when pick less thickness, these films are easy to tear and once you peel this off for repositioning purpose, film will stretch easily.
Age of custom bumper stickers, people use custom bumper stickers for many purposes, marketing, campaign or just for entertainment.one you have decided the age of one's custom bumper stickers, it must be followed by adhesive considerations. If you sticker less than one year of age you have to choose lower adhesion usually in the regarding 2 to 5 pounds/inch [0.4-0.9 kg/cm] peel-back adhesion allowing the film always be removed remove easily without the aid of heat and chemicals and whitout adhesive residue. However, its lower may lead to some lifting of film in places that the film is incredibly stretched.
Clean the surfaces, remember . on this occasion we try to utilize a custom bumper stickers, first ought to consider that our bumpers are contaminated especially from dirty, oil and dead insects. Wash your bumpers with liquid dishwashing detergent, per gallon of lukewarm water, and rinse it with water, dry the surface thoroughly with clean, lint-free paper towels, you may use heat gun to accelerate the blow drying.
Please note : moisture prevents the adhesive of your custom bumper stickers from adhering correctly, can cause bubbles and can freeze in cold areas.
Wipe the surface again with a solvent based cleaner through : saturate a clean paper towel, wipe it with lint-free paper towel before the solvent evaporate from the substrate, make sure the substrate is completely dry, if necessary use a heat gun to dry any retained chemicals. Finally apply your custom bumper stickers promptly.
Please note : car wax can greatly reduce graphic adhesion. Solvent based cleaners must be used to thoroughly remove any wax deposit. Alcohol based cleaners do not remove wax as effectively.
find more usefull informations only at http://www.decalspaint.com